TM 5-4210-233-14&P-2
6-8. CYLINDER BLOCK- Continued
(23)
Remove eight cylinder liners (5) from
engine block (3). Coat liners with
lubricating oil (Item 10, Appendix E).
(24)
Remove cylinder liner inserts (4) from
each cylinder recess.
(25)
Remove two seal rings (1) from
grooves (2) of each cylinder of engine
block (3).
WARNING
Compressed air used for cleaning purposes will not exceed 30 psi (207 kPa). Use
only with effective chip guarding and personal protective equipment
(goggles/shield, gloves, etc.).
(26)
Dry engine block (3) with compressed air.
(27)
Coat engine block machined surfaces with lubricating oil (Item 1O, Appendix E) to prevent rust.
e. Follow-on maintenance.
(1)
Install air box drains (see para 6-12.).
(2)
Install crankshaft (see para 6-29.).
(3)
Install air box covers (see para 6-11.).
(4) Install rear end plate (see para 6-10.).
(5)
Install front end plate (see para 6-9.).
(6)
Install cylinder heads (see para 6-13.).
(7)
Install oil cooler (see para 5-15.).
(8)
Install starter (see para 5-12.).
(9)
Install engine from stand (see para 5-11.).
6-65