TM 5-4210-233-14&P-2
6-9. CYLINDER BLOCK FRONT END PLATE - Continued
(3)
Remove front end plate (3) and gaskets (6 and 7) from engine block (8).
CAUTION
Support front end plate on flat, even surface when removing screw insert to
prevent warping or bending end plate.
(4) Remove screw insert (9) from front end plate (3).
b. Installation.
CAUTION
Support front end plate on flat, even surface when installing screw insert to prevent
warping or bending end plate.
(1)
Support front end plate (1).
(2)
Press screw insert (2) into front end plate (1) until head seats on end plate surface.
6-67