TM 5-4210-233-14&P-2
6-65. AIR COMPRESSOR - Continued
(10)
Remove unloader components (1 0, 1 1, and
12). Remove O-rings (10) from pins (1 1) and
discard.
(11)
Remove and discard gasket (13). Clean gasket
surfaces and inspect for damage.
CAUTION
Be extremely careful to avoid scratching
machined surfaces.
(12)
Remove the five remaining bolts (8) holding the head
(1 4) to the block.
(13)
Tap head gently with brass or plastic mallet to loosen,
if necessary.
(14)
Lift head assembly off block.
(15)
Remove and discard gasket (15) and clean gasket
surfaces.
6-386