TM 5-4210233-14&P-2
6-64. LOCKUP CUTOFF VALVE BODY - Continued
b. Disassembly.
NOTE
When assembled, each valve should be installed in same bore from which valve
was removed. Tag and mark all parts.
(1)
Remove retainer pin (1) from valve body (2).
(2)
Remove valve plug (3) and second and third clutch lockup cutoff valve (4) from bore (5).
(3)
Remove retainer pin (6) from valve body (2).
(4)
Remove valve plug (7) and first and second clutch lockup cutoff valve (8) from bore (9).
(5)
Remove retainer pin (10) from valve body (2).
(6)
Remove valve plug (11) and third and fourth clutch lockup cutoff valve (12) from bore (13).
c. Cleaning and Inspection.
WARNING
Dry cleaning solvent P-D-680 is potentially dangerous. Avoid repeated and
prolonged breathing of vapors and skin contact with the liquid. Do not use near
open flame, arcing equipment or other ignition sources. Always wear eye
protection and protective clothing. The flash point of P-D-680 is 100 to 138 deg. F
(38 to 59 deg. C).
(1)
Clean valve body and valves with dry cleaning solvent (Item 3, Appendix E).
(2)
Inspect valve body and valves for nicks burrs, and scratches. Remove defects with crocus cloth. If
scratches are deep or part is cracked, replace part.
6-382
TM 5-4210-233-14&P-2
6-64. LOCKUP CUTOFF VALVE BODY - Continued