TM 5-4210-233-14&P-2
6-36. CAMSHAFTS AND PULSE WHEEL - Continued
(32)
Check clearance between thrust washer (34) and shoulder (35) of camshaft (1). If clearance is less
than 0.003 in. (0.08 mm) or greater than 0.01 8 in (0.45 mm), replace camshaft (1).
(33)
Check backlash between gears (4 and 5). Minimum backlash is 0.002 in. (0.05 mm). Maximum
backlash is 0.010 in. (0.25 mm).
f.
Adjustment.
(1)
Refer to Synchronous and Timing Reference Sensor Adjustment procedures (see para 6-28.).
g. Follow-on Maintenance.
(1)
Install water pump drive gear (see para 6-39.).
(2)
Install front balance cover (see para 6-38.).
(3)
Install flywheel housing and rear oil seal (see para 6-31.).
(4)
Install cylinder heads (see para 6-13.).
(5)
Remove engine from engine stand.
6-223
