TM 5-4210-233-14&P-2
6-37. CAMSHAFT END BEARING BUSHINGS
b. Installation.
(1)
Press two bushings (1) into camshaft front end bearing (2) until flush with ends of bearing (2).
(2)
Press two bushings (1) into camshaft rear end bearing (3) until bushing sticks out approximately
0.045 to 0.055 in. (1.14 to 1.40 mm).
(3)
Install two thrust washers (4) on rear end bearing (3).
(4)
Bore bushings (1) to 1.500 to 1.501 in. (38.100 to 38.125 mm).
c.
Follow-on Maintenance.
(1)
Install camshaft end bearings (see para 6-36).
6-225
