TM 5-4210-233-14&P-2
6-38. FRONT BALANCE COVER AND VIBRATION DAMPER
This task covers:
a. Removal
c. Installation
b. Cleaning and Inspection
d. Follow-on Maintenance
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Engine Removed (see para 5-11.)
(Appendix B, Section III, Item 1)
Fan and Mounting Removed (see para 4-132.)
Water Pump Removed (see para 5-25.)
MATERIALS/PARTS REQUIRED
Grease, Automotive and Artillery (Item 1, Appendix E)
Dry Cleaning Solvent (Item 3, Appendix E)
Oil Seal (Figure 108, Appendix F)
Gasket (Figure 108, Appendix F)
a. Removal.
(1)
Remove screw (1), lockwasher (2) and washer (3).
(2)
Remove vibration damper (4) and key (5) from drive shaft.
NOTE
Tag and mark screws, lockwashers, washers and front cover
before removing.
6-226
