TM 5-4210-233-14&P-2
6-37. CAMSHAFT END BEARING BUSHINGS
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Camshaft End Bearings Removed
(Appendix B, Section III, Item 1)
(see para 6-36.)
Shop Equipment, Automotive
Maintenance and Repair
(Appendix B, Section III, Item 4)
a. Removal.
NOTE
Do this procedure only if camshaft end bearing bushings fail
inspection specifications in para 6-36. If one bushing in end
bearing has failed both bushings must be replaced.
(1)
Remove two thrust washers (1) from camshaft rear end bearing (2).
(2)
Remove two bushings (3) from camshaft front and rear end bearings (4 and 2).
6-224