TM 5-4210-233-14&P-2
6-22. CAM FOLLOWERS AND PUSH RODS
This task covers:
a.
Removal
c.
Follow-on Maintenance
b.
Installation
TOOLS REQUIRED
MATERIALS/PARTS REQUIRED
Tool Kit, General Mechanics, Automotive
Tags, identification (Item 32, Appendix E)
(Appendix B, Section III, Item 1)
Oil, lubricating (Item 10, Appendix E)
Shop Equipment, Automotive
EQUIPMENT CONDITION
Maintenance and Repair
Cylinder Head Removed from Engine
(Appendix B, Section III, Item 4)
(see para 6-13.)
Rocker Arms Removed (see para 6-21.)
Gauge, feeler (Appendix B, Section 1II, Item 38)
Exhaust Valve Bridge Removed (see para 6-24.)
a.
Removal.
NOTE
Tag (Item 32, Appendix E) cam follower and
associated parts so they may be in- stalled in
original location.
This procedure shows removal of one cam follower.
Remove other cam followers in same way.
(1) Set cylinder head (1) on side on 1 in. (25
mm) wooden blocks.
(2) Remove two screws (2) and lockwashers (3)
from cam follower guide (4).
(3) Remove cam follower guide (4) from cylinder
head (1).
(4) Remove cam follower (5) and push rod
assembly (6), as a unit, from cylinder head
(1).
(5) Remove cam follower (5) from push rod
assembly (6).
6-117