TM 5-4210-233-14&P-2
6-20. EXHAUST VALVES - Continued
NOTE
Board must be thick enough to keep exhaust valves from
touching work surface while installing spring retainers.
(5) Set cylinder head (1) right side up on top of a board.
NOTE
Repeat steps (6) through (9) for each valve being installed.
(6) Install washer (3), spring (4), and seat (5).
(7) Compress spring (4) using valve spring compressor.
(8) Install valve spring retainer (6) on valve (2).
(9) Release pressure on spring (4).
e. Follow-on Maintenance.
(1) Install cam followers and push rods (see para 6-22).
(2) Install fuel injectors (see para 6-43).
(3) Install exhaust valve bridges (see para 6-24).
(4) Install rocker arms (see para 6-21).
(5) Install cylinder head (see para 6-13).
6-112