TM 5-4210-233-14&P-2
6-22. CAM FOLLOWERS AND PUSH RODS Continued
(6) Remove locknut (7), spring (8), and lower
spring seat (9), and push rod (10).
NOTE
Spring retainer must point in proper
direction when installed. Mark direction
of spring retainer for installation.
(7) Remove spring retainer (11) from top side of
cylinder head (1).
(8) Remove upper spring seat (12) from cylinder
head (1).
b.
Installation.
NOTE
Apply lubricating oil (Item 10, Appendix
E) to all parts before installation.
(1) Install spring retainer (1) in top of cam
follower bore in cylinder head (2).
6-118
