TM 5-4210-233-14&P-2
6-13. CYLINDER HEAD REMOVAL/INSTALLATION - Continued
(3)
Remove two screws (7), lockwashers (8), and hose clamp (9).
(4)
Remove engine lifting bracket (10).
(5)
Remove two screws(11) and washers (12) from cross over tube (13) at rear of engine (14).
NOTE
Tag wire before cutting
(6)
Cut brake retarder wire (15) at butt connector.
(7)
Loosen two hose clamps (16) and slide hose (17) up
to clear cover tube (18).
6-78