DRAFT
TM 5-4210-249-13&P-1
FIELD LEVEL MAINTENANCE
DIRECT TANK FILL VALVE DOES NOT OPERATE PROPERLY (AUTO OR MANUAL MODE)
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References (continued)
Lead Set, Test (WP 0622, Item 21)
WP 0412
Tool Kit, General Mechanic's: Automotive
WP 0413
(WP 0622, Item 27)
WP 0418
WP 0441
Personnel Required
WP 0447
MOS 63B Wheeled vehicle mechanic (2)
WP 0457
WP 0458
References
WP 0459
TM 9-2320-325-14&P
WP 0499
WP 0463
Equipment Conditions
WP 0303
WP 0540
Engine OFF (TM 9-2320-347-10)
WP 0325
Wheels chocked (TM 9-2320-347-10)
WP 0337
WP 0339
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
DIRECT TANK FILL VALVE DOES NOT OPERATE PROPERLY (AUTO OR MANUAL MODE)
NOTE
Ensure cap is installed tightly on DIRECT TANK FILL during this procedure, or connect
hose to DIRECT TANK FILL connector to drain water into appropriate container or to
ground. If direct tank fill valve opens during this procedure, water will discharge from tank
uncontrolled.
Do not engage water pump engine during this procedure. Valve operation can be checked
without pump operation.
Valve operations can be checked by observing valve shaft rotation.
If it is known that direct tank fill valve operates properly in manual mode, go to Step 2.
0105-1