DRAFT
TM 5-4210-249-13&P-1
0104
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02891
Step 74.
Put bumper turret control POWER switch to
(off) position (WP 0004). Turn battery
disconnect switch to OFF position (WP 0007). Disconnect bumper turret wire harness
bumper turret junction box connector. With a test lead set, check for continuity across
bumper turret junction box motor power wire (red) from bumper turret junction box
connector, terminal 2 to bumper turret junction box 9-pin terminal strip, terminal 2.
If there is no continuity, repair bumper turret junction box motor power wire
(red) in bumper turret junction box wire harness if repairable
(TM 9-2320-325-14&P), or replace bumper turret junction box wire
harness (WP 0573).
TFFT02892
Step 75.
Remove cab instrument panel E (WP 0311). With a test lead set, check for continuity
across bumper turret wire harness motor power wire (red) from bumper turret wire
harness bumper turret control connector, terminal 3 to bumper turret wire harness
bumper turret junction box connector, terminal 2.
If there is no continuity, repair bumper turret wire harness motor power wire
(red) in bumper turret wire harness if repairable (TM 9-2320-325-14&P), or
replace bumper turret wire harness (WP 0437).
0104-49