DRAFT
TM 5-4210-249-13&P-1
OPERATOR MAINTENANCE
STARTING/STOPPING WATER PUMP ENGINE (CAB INSTRUMENT PANEL
AND PUMP OPERATOR'S PANEL)
STARTING WATER PUMP ENGINE (ENGAGE PUMP)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 72
Do not leave cab or attempt any pumping operations until all required indicator
lights are illuminated. Failure to comply may result in injury to personnel and
damage to equipment.
CAUTION
The water pump is constantly engaged and operates whenever the water pump
engine is running. At least one water inlet valve to water pump must be opened
whenever the pump engine is running. A pressure reading on the pump discharge
gauge (engine running) indicates adequate water supply to the pump for cooling.
Failure to comply may result in pump overheating and/or damage to equipment.
During operations above 32F (0C), ensure pump house cooling winterization
cover is removed from left side pump house panel. Failure to comply may result in
damage to equipment.
1.
Ensure water tank is full or water source is connected to vehicle.
2.
Start vehicle engine (TM 9-2320-347-10).
3.
Open at least one water source to water pump (tank to pump, main inlet or auxiliary inlet).
0022-1