DRAFT
TM 5-4210-249-13&P-1
OPERATOR MAINTENANCE
PUMP ENGINE GOVERNOR CONTROL DOES NOT OPERATE
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
References
Equipment Conditions
Water pump engine OFF (WP 0022)
Engine OFF (TM 9-2320-347-10)
Wheels chocked (TM 9-2320-347-10)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
PUMP ENGINE GOVERNOR CONTROL DOES NOT OPERATE
TFFT03924
Step 1.
Turn battery disconnect switch to ON position (WP 0007). Start water pump
engine (WP 0022). If operating governor control from cab, check if operator's panel
governor control is active (WP 0004).
If pump operator's panel governor control is active, select MODE switch to
deactivate governor control. Then select cab governor control MODE
switch to active cab governor control.
Step 2.
If operating governor control from pump operator's panel, check if cab governor control
is active.
If cab governor control is active, select MODE switch to deactivate governor
control, then select pump operator's panel governor control MODE switch to
activate pump operator's panel governor control.
0062-1