TM 5-4210-233-14&P-2
6-51. TRANSMISSION HOUSING
This task covers:
a. Disassembly
c. Assembly
b. Cleaning and Inspection d. Follow-on Maintenance
TOOLS REQUIRED:
MATERIALS/PARTS REQUIRED
Tool Kit, General Mechanics, Automotive
Solvent, Dry Cleaning (Item 3, Appendix E)
(Appendix B, Section II, Item 1)
Compound, Sealing, Lubricating
(Appendix B, Section III, Item 4)
Shop Equipment, Automotive
Oil Seal (Figure 133, Appendix F)
Maintenance and Repair
Cotter Pin (Figure 133, Appendix F)
(Appendix B, Section 111, Item 4)
EQUIPMENT CONDITION
Manual Shaft Oil Seal Remover and Installer
Rear Cover and First Clutch Assembly Removed
(Appendix B, Section 111, Item 65)
(see para 6-58.)
Gear Unit and Main Shaft Assembly Removed
(see para 6-55.)
Control Valve Body Removed (see para 6-62.)
a. Removal.
NOTE
Discard all old seals and gaskets.
(1)
Remove nut (1) from manual shaft (2).
(2)
Remove selector lever (3) from manual shaft
(2).
(3)
Remove cotter pin (4).
(4)
Remove locknut (5).
(5)
Hold detent lever (6) with one hand and
remove manual shaft (2) by pulling shaft
through oil seal (7).
(6)
Remove detent lever (6) from transmission
housing (8).
6-290