TM 5-4210-233-14&P-2
6-62. CONTROL VALVE BODY
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
b. Cleaning and Inspection f. Follow-on Maintenance
TOOLS REQUIRED:
MATERIAL/PARTS REQUIRED
Tool Kit, General Mechanics, Automotive
Oil, Lubricating (Item 10, Appendix E)
(Appendix B, Section III, Item 1)
Solvent, Dry Cleaning (Item 3, Appendix E)
Tags, Identification (Item 32, Appendix E)
Shop Equipment, Automotive
Maintenance and Repair
PERSONNEL REQUIRED: 2
(Appendix B, Section 111, Item 4)
EQUIPMENT CONDITION
Modulator Valve Removed (see para 6-63.)
Lockup Cutoff Valve Body Removed
(see para 6-64.)
a. Removal.
CAUTION
Be sure forward clutch is secured before turning
transmission. Clutch could fall and be damaged if
not secured.
(1)
Remove two screws (1) and oil baffle
(2).
(2)
Remove screw (3) and manual detent
lever (4).
(3)
Remove 15 screws (5), seven screws
(6), three screws (7), two screws (8),
and two washers (9).
(4)
While holding selector valve (10),
remove control valve body (11) from
transmission housing (12).
6-362