TM 5-4210-233-14&P-2
6-58. REAR COVER AND FIRST CLUTCH ASSEMBLY
This task covers:
a. Removal
d.
Assembly
b. Disassembly
e.
Installation
c. Cleaning and Inspection f.
Follow-on Maintenance
TOOLS REQUIRED
MATERIALS/PARTS REQUIRED
Tool Kit, General Mechanics, Automotive
Oil, Lubricating (Item 10, Appendix E)
(Appendix B, Section III, Item 1)
Solvent, Dry Cleaning (Item 3, Appendix E)
Compound, Retaining (Item 6, Appendix E)
Shop Equipment, Automotive
Compound, Sealing, Pipe Thread
Maintenance and Repair
(Item 2, Appendix E)
(Appendix B, Section il, Item 4)
Grease, General Purpose, Lithium Base
(Item 48, Appendix E)
Clutch Spring Compressor
Seal Ring (Figure 137, Appendix F)
(Appendix B, Section III Item 73)
Output Shaft Bushing Installer
PERSONNEL REQUIRED: 2
(Appendix B, Section III, Item 78)
EQUIPMENT CONDITION
Output Yoke, Dust Shield, and Oil Seal Removed
(see para 6-56.)
Governor Removed (see para 5-29.)
a. Removal.
(1)
Position transmission (1) so output shaft (2) is pointing up.
(2)
Install yoke (3) and nut (4).
(3)
Remove three screws (5) and lockwashers (6).
(4)
Remove 21 screws (7) and lockwashers (8).
6-331
