TM 5-4210-233-14&P-2
6-55. GEAR UNIT AND MAIN SHAFT ASSEMBLY
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning and Inspection f. Follow-on Maintenance
TOOLS REQUIRED:
MATERIALS/PARTS REQUI RED
Tool Kit, General Mechanics, Automotive
Solvent, Dry Cleaning (item 3, Appendix E)
(Appendix B, Section III, Item 1)
Compound, Sealing, Lubricating
(Item 31, Appendix E)
Shop Equipment, Automotive
Oil, Lubricating (Item 10, Appendix E)
Maintenance and Repair
Tag, Identification (item 32, Appendix E)
(Appendix B, Section III, Item 4)
PERSONNEL REQUIRED: 2
Sun Gear Bushing Reamer Set
(Appendix B, Section 1II, Item 66)
EQUIPMENT CONDITION
Bushing Installer (Appendix B, Section 111, Item 67)
Second Clutch and Center Support Housing
Main Shaft Lifting Bracket
Removed (see para 6-61.)
(Appendix B Section 111, Item 68)
Bushing Swaging Tool
(Appendix B, Section 111, Item 69)
a. Removal.
(1)
Install lifting bracket (item 68, Section 111, Appendix B) to main shaft (1) of gear unit assembly (2).
WARNING
Serious injury could occur if heavy equipment is moved/lifted
without sufficient personnel to do the job. Use proper physical
lifting procedures or use a suitable lifting device or dolly. Wear
safety shoes, gloves and other suitable protective cloth- ing.
Area should be clear of other personnel. Serious injury or death
can result from falling objects.
(2)
Remove gear unit assembly (2) from transmission housing (3) while other person operates lifting
device.
(3)
Remove lifting bracket.
6-300