TM 5-4210-233-14&P-2
6-36. CAMSHAFTS AND PULSE WHEEL
This task covers:
a. Removal
e. Installation
b. Disassembly
f. Adjustment
c. Cleaning/inspection
g. Follow-on Maintenance
d. Assembly
TOOLS REQUIRED
MATERIALS/PARTS REQUIRED
Tool Kit, General Mechanics, Automotive
Solvent, dry cleaning (Item 3, Appendix E)
(Appendix B, Section III, Item 1)
Oil, lubricating (Item 10, Appendix E)
Grease, automotive and artillery
Shop Equipment, Automotive
(item 1, Appendix E)
Field Maintenance
Tags, identification (Item 32, Appendix E)
(Appendix B, Section III, Item 4)
Gasket (Figure 106, Appendix F)
Oil Seal (Figure 106, Appendix F)
Puller, camshaft gear (Appendix B, Section III, Item 52)
Remover, camshaft gear and water pump pulley
EQUIPMENT CONDITION
(Appendix B, Section III, Item 53)
Engine Installed on Engine Stand
Set, dial indicator (Appendix B, Section Ill, Item 32)
Cylinder Heads Removed (see para 6-13.)
Gauge, feeler (Appendix B, Section III, Item 38)
Flywheel Housing Removed (see para 6-31.)
Puller (Appendix B, Section III, Item 54)
Front Balance Cover Removed (see para 6-38.)
Adapter (Appendix B, Section III, Item 55)
Water Pump Drive Gear Removed 6-39.)
a. Removal.
(1) Remove four screws (1), adapter (2), and retainer (3) from left camshaft gear (4).
6-208