TM 5-4210-233-14&P-2
6-35. IDLER GEARS - Continued
e. Installation.
(1) Align timing marks on camshaft gear (1)
and crankshaft gear (2) with timing marks
on idler gear (3).
(2) Slide idler gear (3) into place until
crankshaft gear (2) and camshaft gear (1)
are fully meshed.
(3) Rotate gear hub (4) so dowel in hub aligns
with hole in end plate (5).
(4) Tap hub (4) until it seats against end plate
(5).
(5) Check timing marks again to make sure
gears (1, 2, and 3) are aligned as shown.
(6) Install screw (6) and special washer (7).
(7) Tighten screw (6) to 80 to 90 Ib-ft (108 to
122 N.m).
(8) Coat bearing (8) and idler gear (3) with
lubricating oil (Item 10, Appendix E).
6-206