TM 5-4210-233-14&P-2
6-8. CYLINDER BLOCK
This task covers:
a. Disassembly
d. Testing
b. Cleaning Inspection
e. Follow on Maintenance
c. Assembly
TOOLS REQUIRED:
MATERIALS/PARTS REQUIRED
Tool Kit, General Mechanics, Automotive
Engine Removed (see para 5-11.)
(Appendix B, Section III, Item 1)
Starter Removed (see para 5-12.)
Oil Cooler Removed (see para 5-15.)
Shop Equipment, Automotive
Engine Mounted on Engine Stand
Maintenance and Repair
Front End Plate Removed (see para 6-9.)
(Appendix B, Section III, Item 4)
Rear End Plate Removed (see para 6-10.)
Air Box Covers Removed (see para 6-11.)
Remover/installer, core plug
Air Box Drains Removed (see para 6-12.)
(Appendix B, Section II, Item 16)
Crankshaft Removed (see para 6-29.)
Gauge, cylinder bore
Cylinder Heads Removed (see para 6-13.)
(Appendix B, Section III, Item 18)
Gauge, cylinder liner depth
MATERIALS/PARTS REQUIRED
(Appendix B, Section II, Item 19)
Oil, lubricating (Item 10, Appendix E)
Engine block pressure testing kit
Compound, sealing, lubricating (Item 31, Appendix E)
(Appendix B, Section III, Item 20)
Compound, sealing, pipe thread (Item 2, Appendix E)
Antifreeze, permanent (Item 29, Appendix E)
PERSONNEL REQUIRED - 2
Compound, International, No. 2 (Item 37, Appendix E)
Gaskets (Figure 100, Appendix F)
Seals (Figure 100, Appendix F)
a.
Disassembly.
(1)
Remove oil galley plugs (1, 2, and 3) from
front of engine block (4).
(2)
Remove drain cock (5).
(3)
Remove plugs (6 and 7).
(4)
Remove connector (8).
6-45