TM 5-4210-233-14&P-2
6-8. CYLINDER BLOCK- Continued
(5)
Remove oil galley plug (9) from rear end of
engine block (4).
(6)
Remove oil galley plug (10).
(7)
Remove two plugs (11) from right side of
engine block (4).
(8)
Remove drain cock (12).
(9)
Remove compressor oil supply elbow (13)
and fitting (14).
(10) Remove oil galley plugs (15 and 16).
(11) Remove elbow (17), fitting (18), and
reducer bushing (19).
(12) Remove plug (20).
(13) Remove two plugs (21) from left side of
engine block (4).
(14) Remove reducer bushing (22) and ether
starting aid thermostat (23).
(15) Remove two plugs (24).
(16) Remove reducing bushing (25) and elbow
(26) from engine block (4).
(17) Remove oil plug (27).
(18) Remove drain cock (28).
(19) Remove elbow (29), reducing bushing (30), and fitting (31).
(20) Remove two screws (32), lockwashers (33), washers (34), and starter motor bracket (35).
6-46