DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
FLOW SENSOR WIRE HARNESS REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
Equipment Conditions (continued)
Tool Kit, General Mechanic's: Automotive
Pump house panel G removed (for No. 3 and
(WP 0622, Item 27)
No. 4 passenger side discharge flow sensor
wire harnesses and driver side pre-connect B
Materials/Parts
flow sensor wire harness) (WP 0540)
Ties, Cable, Plastic (WP 0625, Item 58)
Pump house panel I removed (for driver side
pre-connect A flow sensor wire
References
harness) (WP 0540)
WP 0615, Fig. 100
Pump operator's panel housing
opened (WP 0325)
Equipment Conditions
Pump house panel A opened (for No. 1 and No. 2
driver side discharge flow sensor wire
harnesses) (WP 0539)
NOTE
No. 1 and No. 2 driver side discharge flow sensors are accessed by opening pump house
panel A.
No. 4 passenger side discharge and driver side pre-connect B flow sensors are accessed
by removing pump house panel G.
Driver side pre-connect A flow sensor is accessed by removing pump house panel I,
located on driver side of transmission.
0451-1
