DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
SHUTOFF CONTROL VALVE MANIFOLD REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 48
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Pump house panel A opened (WP 0539)
Compound, Sealing, Pipe
Pump house panel S removed (WP 0540)
Thread (WP 0625, Item 21)
Air system drained (TM 9-2320-347-10)
Tags, Identification (WP 0625, Item 51)
Ties, Cable, Plastic (WP 0625, Item 58)
Lockwasher (2)
REMOVAL
TFFT02355A
NOTE
Remove cable ties as necessary.
Tag and mark connectors prior to removal to ensure proper installation.
1.
Disconnect eight control valve manifold connectors (1) from valve control manifold wire harness
connectors (2).
CAUTION
Air lines may be removed directly from elbows and fittings, or may remain attached
to elbows and fittings and removed as an assembly. If air lines are removed from
elbows and fittings, care must be taken not to damage air line. If sealing surface of
air line is damaged, air line must be repaired or replaced.
NOTE
Tag and mark air lines prior to removal to ensure proper installation.
2.
Remove air line (3) from elbow (4).
3.
Remove elbow (4) and muffler (5) from control valve manifold (6).
0427-1