DRAFT
TM 5-4210-249-13&P-3
0414
INSTALLATION
TFFT01053
1.
Install pump house cooling fan temperature switch (3) on frame rail (5) with nut (4).
2.
Install two wires (2) on pump house cooling fan temperature switch (3) with two nuts (1).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
3.
Apply electrical sealant to ends of two wires (2) and nuts (1).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install pump house panel T (WP 0540)
2.
Close pump operator's panel housing (WP 0325)
END OF TASK
END OF WORK PACKAGE
0414-2