DRAFT
TM 5-4210-249-13&P-3
0302
CAUTION
Do not over tighten or cross thread temperature sender. Failure to comply may
cause damage to equipment.
2.
Install temperature sender (3) on water tank (13) and tighten locknut (12).
3.
Install fitting (11) on temperature sender (3).
4.
Install cable (10) and grommet (9) on fitting (11) with collar (8).
5.
Install five wires (7) on junction box (4) and tighten five screws (6).
6.
Connect two connectors (5).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT2274
7.
Install junction box (4) in temperature sender (3).
8.
Install preformed packing (2) and temperature sender cover (1) on temperature sender (3).
END OF TASK
FOLLOW-ON MAINTENANCE
Install crew cab (WP 0500)
END OF TASK
END OF WORK PACKAGE
0302-3/(4 blank)