DRAFT
TM 5-4210-249-13&P-2
0258
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00863
4.
Remove two nuts (10), lockwashers (11), four washers (12), two screws (13), bracket (14), and hose (15) from
bracket (16). Discard lockwashers.
5.
Remove two nuts (17), lockwashers (18), four washers (19), and two screws (20) from clamps (21) and (22).
Discard lockwashers.
6.
Remove two nuts (23), lockwashers (24), four washers (25), two screws (26), and clamps (21) and (22) from
bracket (14) and hose (15). Discard lockwashers.
7.
Remove adapter (27) from hose (15).
END OF TASK
INSTALLATION
NOTE
Install cable ties as required.
Perform Steps (1) through (5) if piping was removed.
1.
With the aid of an assistant, install adapter (27) on hose (15) (WP 0489).
2.
Install hose (15) on bracket (14) with two clamps (21) and (22), screws (26), four washers (25), two
lockwashers (24), and nuts (23).
3.
Install two screws (20), four washers (19), two lockwashers (18), and nuts (17) on two clamps (21) and (22).
4.
Install bracket (14) and hose (15) on bracket (16) with two screws (13), four washers (12), two
lockwashers (11), and nuts (10).
0258-2