DRAFT
TM 5-4210-249-13&P-2
FIELD LEVEL MAINTENANCE
MAIN INTAKE RELIEF/DUMP VALVE (DRIVER SIDE) REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
Personnel Required
Tool Kit, General Mechanic's: Automotive
MOS 63B Wheeled vehicle mechanic (2)
(WP 0622, Item 27)
References
Materials/Parts
WP 0483
Ties, Cable, Plastic (WP 0625, Item 58)
WP 0489
Lockwasher (4)
WP 0615, Fig. 37
Preformed Packing (4)
Equipment Conditions
Lockwasher (2)
Pump house panel D removed (WP 0540)
Lockwasher (2)
Water system drained (WP 0041)
Lockwasher (2)
REMOVAL
TFFT00862
1.
With the aid of an assistant, remove coupling (1) from vehicle (WP 0483).
2.
Remove four nuts (2), lockwashers (3), screws (4), preformed packing (5), and main inlet relief/dump valve (6)
from pipe (7). Discard lockwashers and preformed packings.
NOTE
Perform Steps (3) through (7) if piping needs to be removed.
Remove cable ties as required.
3.
Remove coupling (8) and pipe (9) from vehicle (WP 0483).
0258-1