DRAFT
TM 5-4210-249-13&P-2
0256
3.
Tighten lockwasher (24) and nut (23) on bulkhead fitting (25).
NOTE
Perform Steps (4) through (7) if piping was removed.
4.
Install fitting (22) on hose (16).
5.
Install two brackets (15) and (14) on hose (16) with two screws (21), four washers (20), two lockwashers (19),
and nuts (18).
6.
Install hose (16) and two brackets (15) and (14) on support bracket (17) with two screws (13), four
washers (12), two lockwashers (11), and nuts (10).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00888
7.
Install pipe (9) and coupling (8) on vehicle (WP 0483).
8.
Install auxiliary intake relief/dump valve (6) and preformed packing (5) on pipe (7) with four screws (4),
lockwashers (3), and nuts (2).
9.
Install coupling (1) on vehicle (WP 0483).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install pump house panel K (WP 0540)
2.
Adjust auxiliary intake relief/dump valve (WP 0257)
END OF TASK
END OF WORK PACKAGE
0256-3/(4 blank)