DRAFT
TM 5-4210-249-13&P-2
FIELD LEVEL MAINTENANCE
PRIMER PUMP MOTOR CONTROL SOLENOID REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 41
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Water pump engine OFF (WP 0022)
Compound, Sealing (WP 0625, Item 17)
Engine OFF (TM 9-2320-347-10)
Tags, Identification (WP 0625, Item 51)
Wheels chocked (TM 9-2320-347-10)
Locknut (2)
Batteries disconnected (TM 9-2320-325-14&P)
Locknut (1)
Locknut (1)
Locknut (1)
REMOVAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT04101
1.
Remove two locknuts (1) and electrical strip (2) from primer pump motor (3) and primer pump control
solenoid (4). Discard locknuts.
NOTE
Tag and mark wires prior to removal to ensure proper installation.
2.
Remove locknut (5) and wire 2774 (6) from primer pump control solenoid (4). Discard locknut.
3.
Remove locknut (7) and jumperwire (8) from primer pump control solenoid (4). Discard locknut.
4.
Remove locknut (9) and power wire (10) from primer pump control solenoid (4). Discard locknut.
5.
Remove two screws (11) and primer pump control solenoid (4) from primer pump motor (3).
END OF TASK
0260-1