DRAFT
TM 5-4210-249-13&P-2
0256
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00889
4.
Remove two nuts (10), lockwashers (11), four washers (12), two screws (13), brackets (14) and (15), and
hose (16) from support bracket (17) and vehicle. Discard lockwashers.
5.
Remove two nuts (18), lockwashers (19), four washers (20), two screws (21), and brackets (14) and (15) from
hose (16). Discard lockwashers.
6.
Remove fitting (22) from hose (16).
NOTE
Perform Steps (7) through (9) if support bracket needs to be removed.
7.
Loosen nut (23) and lockwasher (24) on bulkhead fitting (25).
8.
Remove drain hose (26) from support bracket (17).
9.
Remove two nuts (27), lockwashers (28), four washers (29), two screws (30), and support bracket (17) from
bracket (31). Discard lockwashers.
END OF TASK
INSTALLATION
NOTE
Perform Steps (1) through (3) if support bracket was removed.
Install cable ties as required.
1.
Install support bracket (17) on bracket (31) with two screws (30), lockwashers (28), four washers (29), and two
nuts (27).
2.
Install drain hose (26) on support bracket (17).