DRAFT
TM 5-4210-249-13&P-1
0110
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02649
Step 12.
Connect No. 2 driver side discharge valve control wire harness connector to No. 2
driver side discharge valve motor. Disconnect No. 1 driver side discharge valve control
wire harness connector from NO. 1 DRIVER SIDE DISCHARGE valve control. Connect
No. 2 driver side discharge valve control wire harness connector to NO. 1 DRIVER
SIDE DISCHARGE valve control. Turn battery disconnect switch to ON
position (WP 0007). While an assistant pushes pump operator's panel NO. 1 DRIVER
SIDE DISCHARGE valve control OPEN and CLOSE buttons (WP 0004), check if No. 2
driver side discharge valve operates.
a.
If No. 2 driver side discharge valve operates, reconnect valve control
wire harness connectors to original positions and replace NO. 2
DRIVER SIDE DISCHARGE valve control (WP 0417).
b.
If No. 2 driver side discharge valve does not operate, reconnect valve
control wire harness connectors to original positions and replace No. 2
driver side discharge valve motor (WP 0388).
0110-10
