DRAFT
TM 5-4210-249-13&P-1
0110
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02643
NOTE
Valve operation must be checked by observing rotation of 7/16 in. hex at end of valve drive
assembly worm gearshaft for Step 4.
Step 4.
While an assistant pushes pump operator's panel NO. 2 DRIVER SIDE DISCHARGE
valve control OPEN and CLOSE buttons (WP 0004), check if No. 2 driver side
discharge valve worm gearshaft moves excessively after valve is fully opened or
closed.
If No. 2 driver side discharge valve worm gearshaft moves excessively after
valve is fully opened or closed, remove and re-install No. 2 driver side
discharge valve motor (WP 0388), ensuring all mounting hardware is
secure.
0110-5