DRAFT
TM 5-4210-249-13&P-1
0110
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02648
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 11.
Turn battery disconnect switch to OFF position (WP 0007). Disconnect No. 2 driver
side discharge valve control wire harness connector from NO. 2 DRIVER SIDE
DISCHARGE valve control. Disconnect No. 2 driver side discharge valve control wire
harness connector from No. 2 driver side discharge valve motor. With a test lead set,
check for continuity across discharge valve control wire harness from terminal to
terminal.
If there is no continuity, repair No. 2 driver side discharge valve control wire
harness if repairable (TM 9-2320-325-14&P), or replace No. 2 driver side
discharge valve control wire harness (WP 0453).
0110-9
