DRAFT
TM 5-4210-249-13&P-1
0110
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02652
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 16.
Disconnect No. 2 driver side discharge valve flow sensor wire harness from No. 2 driver
side discharge flow sensor. Disconnect No. 2 driver side discharge valve flow sensor
wire harness from NO. 2 DRIVER DISCHARGE valve control. Connect No. 2 driver
side discharge flow sensor to NO. 2 DRIVER DISCHARGE valve control (removing wire
harness from circuit). While an assistant spins flow sensor paddle wheel, check if a flow
reading is displayed when flow sensor paddle is spinning.
a.
If a flow reading is displayed when flow sensor paddle is spinning,
repair flow sensor wire harness if repairable (TM 9-2320-325-14&P), or
replace No. 2 driver side discharge valve flow sensor wire
harness (WP 0451).
b.
If a flow reading is not displayed when flow sensor paddle is spinning,
replace No. 2 driver side discharge valve flow sensor (WP 0390).
0110-13
