DRAFT
TM 5-4210-249-13&P-1
0110
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02650
Step 13.
Remove four screws and bezel from pump operator's panel NO. 2 DRIVER SIDE
DISCHARGE valve control. Check for signs of water and moisture damage.
If NO. 2 DRIVER SIDE DISCHARGE valve control shows evidence of water
and moisture damage, replace NO. 2 DRIVER SIDE DISCHARGE valve
control (WP 0417).
Step 14.
Install bezel and four screws on NO. 2 DRIVER SIDE DISCHARGE valve control.
Remove No. 2 driver side discharge valve (WP 0486) and inspect it for binding,
damage, and contamination.
a.
If No. 2 driver side discharge valve is free from binding, damage, and
contamination, reinstall valve (WP 0486) and replace No. 2 driver side
discharge valve motor and drive assembly (WP 0388).
b.
If No. 2 driver side discharge valve is binding, damaged, and/or
contaminated, repair (WP 0387) or replace No. 2 driver side discharge
valve (WP 0486).
0110-11