DRAFT
TM 5-4210-249-13&P-1
0105
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02792
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 21.
Connect main wire harness auto tank fill controller connector. Disconnect pump
operator's panel wire harness pump house power distribution wire harness connector
DP2. With a test lead set, check for continuity across pump house power distribution
wire harness wire 2315 (yellow) from relay P1 connector, terminal 5 to pump house
power distribution wire harness connector DP2, terminal R.
a.
If there is no continuity, repair wire 2315 in pump house power
distribution wire harness if repairable (TM 9-2320-325-14&P), or
replace pump house power distribution wire harness and
block (WP 0457).
b.
If there is continuity, repair wire 2316 in pump operator's panel wire
harness if repairable (TM 9-2320-325-14&P), or replace pump
operator's panel wire harness (WP 0459).
0105-18
