TM 5-4210-233-14&P-2
6-76. SWING MOTOR
THIS TASK COVERS:
a. Disassembly
c. Assembly
b. Cleaning and Inspection
d. Follow-on Maintenance
TOOLS REQUIRED
MATERIALS/PARTS REQUIRED
Tool Kit, General Mechanics, Automotive
O-rings (Figure 178, Appendix F)
Seals (Figure 178, Appendix F)
Dry Cleaning Solvent (Item 3, Appendix E)
(Appendix B. Section III, Item 1
Hydraulic Oil (Item 28, Appendix E)
Shop Equipment, Automotive
Maintenance and Repair
(Appendix B. Section III, Item 4)
EQUIPMENT CONDITION
Swing Motor Removed (see para 5-62.)
a. Disassembly
(1 ) Remove seven 12-point capscrews (1 ) with seven seal washers (2) to remove end cap (3).
(2) Remove and discard seal (4) from end cap (3).
(3) Lift geroter set (5) with spacer (21) off of housing (7).
(4) Slide spacer (6) out of geroter set (5).
(5) Remove and discard seal (10) from stator of geroter set (5).
(6) Carefully withdraw rotor stator to disassemble geroter set (5).
(7) Lift off spacer plate (9).
6-443