TM 5-4210-233-14&P-2
6-60. THIRD CLUTCH AND CENTER SUPPORT HOUSING - Continued
e. Installation.
(1)
Install third clutch piston (1) in center support housing (2).
(2)
Install thrust washer (3).
NOTE
Center support housing is fitted to transmission housing with
very little clearance and may bind if transmission housing is
cold. Heat transmission housing with heat lamp or warm current
of air.
(3)
Lower center support housing (2) in transmission housing (4). Make sure tapped hole (5) in support
housing is aligned with screw hole (6) in transmission housing.
(4)
Install support housing anchor screw (7) and washer (8). Tighten support housing anchor screw
finger-tight.
6-354
