TM 5-4210-233-14&P-2
6-60. THIRD CLUTCH AND CENTER SUPPORT HOUSING - Continued
(3)
Use swaging tool (Appendix B, Section III, Item 79) to swage bushing (2) by staking edges of oil
hole (3).
(4)
Set third clutch piston (4) in front cavity of center support housing (1).
(5)
Install 20 piston release springs (5) in pockets on third clutch piston (4).
(6)
Install clutch ring (6) on third clutch piston (4).
CAUTION
Clutch ring must be pushed completely down in center support housing while
installing retaining rings or clutch clearance will be wrong and transmission will not
shift properly.
(7) Install four retainings rings (7). Remove third clutch piston (4) from support housing (1).
6-352