TM 5-4210-233-14&P-2
6-50. TORQUE CONVERTER PUMP - Continued
(4)
Bend corners of two lockstrips (5) away from heads of
two opposing screws (6).
(5)
Remove two screws (6) from lockstrips (5).
(6)
Install puller (7).
(7)
Tighten puller (7) to separate pump (8) from ground
sleeve (3).
(8)
Remove puller (7).
(9)
Remove pump (8) and set on work surface.
b. Disassembly.
NOTE
Discard old seals when disassembling.
(1)
Bend corners of four lockstrips (1) away from heads of 10
screws (2).
(2)
Remove 10 screws (2) and six lockstrips (1).
6-272
