TM 5-4210-233-14&P-2
6.50. TORQUE CONVERTER PUMP - Continued
e. Installation.
NOTE
Keep new seal ring sealed in package
until ready to use so seal ring does not
change shape.
(1)
Roll seal ring (1) to one-half length and hold
for at least 10 seconds.
(2)
Install seal ring (1) in groove (2).
(3)
Install pump (3) in torque converter housing (4)
(4)
Install bearing installer tool (Appendix B, Section
111, Item 61) around ground sleeve (5) and on
bearing (6).
6-275
