TM 5-4210-233-14&P-2
6-49. TORQUE CONVERTER STATOR
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning and Inspection f. Follow-on Maintenance
TOOLS REQUIRED
MATERIALS REQUIRED
Tool Kit, General Mechanics, Automotive
Oil, Lubricating (Item 10, Appendix E)
(Appendix B, Section III, Item 1)
Solvent, Dry Cleaning (Item 3, Appendix E)
Shop Equipment, Automotive
EQUIPMENT CONDITION
Maintenance and Repair
Flywheel Assembly Removed (see para 6-48.)
(Appendix B, Section III, Item 4)
Stator Roller Holder (Appendix B, Section III, Item 60)
NOTE
Twist stator counterclockwise and away from torque converter pump when
removing stator from shaft.
Bearings and springs may fall out when stator is removed.
a. Removal. Remove stator (1) from shaft (2).
b. Disassembly.
(1)
Hold rim of stator (1) on work surface.
(2)
Turning roller race (2) clockwise, slowly remove roller race from stator (1).
(3)
Remove 1 0 roller springs (3) and 10 rollers (4) from stator (1).
(4)
Remove roller bearing (5) and thrust bearing race (6) from stator (1).
6-268