TM 5-4210-233-14&P-2
6-38. FRONT BALANCE COVER AND VIBRATION DAMPER - Continued
(8)
Install screw (25), Iockwasher (26) and washer (27). Tighten screw to a torque of 71 to 75 lb ft (96
to 102 Nm).
(9)
Install two screws (34), lockwashers (35) and washers (36). Tighten screws to a torque of 137 to
147 lb ft (186 to 200 Nm).
(10)
Install key (28) in shaft (30) and install vibration damper (29) on shaft and key.
(11)
Install washer (33), lockwasher (32) and screw (31) to secure vibration damper (29) to shaft.
Tighten screw to a torque of 25 lb ft (34 Nm).
g. Follow-on Maintenance.
(1)
Install water pump (see para 5-25).
(2)
Install an and mounting (see para 4-132).
(3)
Install engine (see para 5-11).
6-231
