TM 5-4210-233-14&P-2
6-27. CRANKSHAFT COVER AND FRONT OIL SEAL - Continued
(6) Install two screws (7) and lockwashers (8) in
crankshaft cover (2).
(7) Tighten two screws (7) to 80 to 90 lb-ft (108
to 122 Nm).
(8) Position trunnion (9) against crankshaft
cover (2).
(9) Install four screws (10) and lockwashers (11)
in trunnion (9).
(10)
Install two screws (12) and lockwashers (13).
(11)
Install two screws (14) and lockwashers (15).
(12)
Torque screws (1 2 and 14) to 30 to 35 lb-ft
(41 to 47 Nm).
(13)
Torque screws (10) to 70 to 75 lb-ft (94 to
102 Nm).
(14)
Coat ring (16) with light coat of grease (Item 1, Appendix E) and slide over trunnion (9).
6-134