TM 5-4210-233-14&P-2
6-26. CRANKSHAFT VIBRATION DAMPER - Continued
(3) Remove vibration damper (3).
(4) Turn cone (5) clockwise and remove from
crankshaft (2) inside trunnion support (6).
(5) Position damper (3) in soft jaw vise.
(6) Remove eight screws (7), scuff plate (8), and
hub (9) from vibration damper (3).
(7) Remove two pins (1 0) from hub (9).
b.
Installation.
(1) Install two pins (1) in unthreaded bores in hub
(2).
(2) Press two pins (1) through hub (2) until pins
stick out from hub 3/8 in. (9.5 mm).
(3) Install eight screws (3), scuff plate (4), and
hub (2) in vibration damper (5).
(4) Tighten eight screws (3) to 75 to 85 !b-ft (102
to 115 N m).
6-129