TM 5-4210-233-14&P-2
6-27. CRANKSHAFT COVER AND FRONT OIL SEAL - Continued
(12) Support crankshaft cover (15) outer
face on two wooden blocks.
(13) Drive front seal (20) out front side of
crankshaft cover (15).
b.
Installation.
NOTE
Do not remove lubricant or plastic
coating on outer surface of new front
seal.
(1) Coat sealing lip of front seal (1) with grease
(Item 1, Appendix E).
(2) Position front seal (1) in crankshaft cover
(2) with sealing lip of front seal against
inner face of crankshaft cover.
(3) Drive front seal (1) into crankshaft cover
(2).
(4) Coat gasket (3) with grease (Item 1, Appendix E) and install on engine block (4).
(5) Install crankshaft cover (2) on dowels (5) and engine block (4) while sliding oil seal
(1) over crankshaft (6).
6-133