TM 5-4210-233-14&P-2
6-13. CYLINDER HEAD REMOVAL/INSTALLATION - Continued
NOTE
Left and right banks are different. Left bank has
three screws. Right bank has only two screws.
Bracket shown being installed on left bank.
(16)
Install two screws (30), !ockwashers (31), and hose clamp (32). Tighten screws to 20 to 25 lb-ft
(27 to 34 N-m).
(17)
Install bracket (33), screw (34), and lockwasher (35).
(18)
Install two screws (36), lockwashers (37), and washers (38). Tighten screws to 20 to 25 lb-ft
(27 to 34 N.m).
d. Follow-on Maintenance.
(1)
(2)
Install rocker covers (see para 4-140).
(3)
Install thermostat housings (see para 4-137).
(4)
Install air cleaner air hoses (see para 4-128).
(5)
Install engine coolant (see para 5-31).
6-86
